Should Fixing Coin Hacks Take 40 Steps?

0
563

Some people use coin-op like adventure coin shop maplestory laundry machines, and it has become a common problem due to the slowly decaying capacitors (or even completely dead ones) that can make their coins disappear into thin air. Instead of getting mad, frustrated, and then quickly giving up on a coin machine, this guide outlines what should be done in order to fix a malfunctioning machine. The article takes you through the correct steps for finding and diagnosing the problem with your specific coin-op machine so you can get your money back where it belongs.

Coin machines are becoming more popular because they are offered at many locations all over the world.

1. Check the Fuses

The first thing that you should do when your coin machine appears not to be working correctly is to check the fuses. You should do this in order to determine whether or not a fuse has blown or if it is still intact. When checking the coin machine’s fuses, you need to make sure that everything is connected correctly.

To check this, remove the fuse from its holder and then touch one of the wires on it with your tongue. If it is working properly, then you will get a tingly feeling on your tongue as soon as you touch it. If you are unable to feel anything or if you feel a strong burning sensation instead, then you need to replace the fuse with a new one.

2. Check the Coils

The first thing that you need to do when checking the coin machine’s coils is to make sure that they are not burned or damaged in any way. If a coil is burnt or damaged, then it will need to be replaced in order to fix the problem. It can be a little difficult to check a coil without testing it out and seeing if it works. The easiest way to check it is by using a multimeter and placing one of the probes on any two given contacts on the coils each time. You should do this until you find a spot where if you place your tongue between the probes and touch them with your tongue, then you will get a short buzzing sensation on your tongue.

3. Check the Coin Return

Since it is nearly impossible to check out the coils without testing them and they can be hard to remove and put back in, you should also plan on taking the coin return on your coin machine apart. You will need to do this in order to fix a malfunctioning coin machine if it is broken or damaged. You should put your hands around the sides of the coin return and then press them down while turning at least 3 times. You should also use your thumb to push up against one of the metal plates that is used for this purpose.

4. Check the Coin Door

If the coin door is not firmly closed, then it will not be able to hold any coins. If there are no coins available to make it appear as if your coin machine is working at its highest capacity, then you will not be able to collect any money from it. You should also check these plates and springs in order to make sure that they are securely attached to the door so that you can properly attach a new one if one of these components are broken or damaged.

5. Check the Dies

A die is a removable card that has a unique design on both sides and can be easily seen by looking at its edges. These dies tell the coin machine how to correctly store and display coins and are a very important component of a functioning coin machine. You should take this component out of your coin machine and then invert the card so that it is upside down with the alignment marks facing upwards. You should then check for any chips or other damage that might be on these cards.

6. Check the Coin Mechanism

Finally, you also need to make sure that all of the magnetic parts are installed properly as well as any teeth at each position. When you hear your coin machine clunking in a different way than it normally would, then this is likely because one or more of these magnetic parts are not aligned correctly with one another. If there are no alignment issues, then you can check to make sure that the coin mechanism is turned so that it is perpendicular to the ground.

7. Check the Path of the Coins

The path of the coin in order to be accepted by a functioning coin machine is very clear and precise. If these paths are blocked in any way, then you will not be able to get any coins back from your malfunctioning coin machine. You need to check both sides of the coils in order to find out if there is anything blocking them and if anything needs to be removed or adjusted in order for your coins to function properly again.

Summary:

It is possible to fix a malfunctioning coin machine by following the steps outlined above. If you have any problems with your machine, then you should take these steps in order to help you make sure that you get your money back.

LEAVE A REPLY

Please enter your comment!
Please enter your name here